Note! Can only be installed by a registered installation company.
- Product Information
- Technical Descriptions
- Questions and Answers
- Warranty
Product Information
- Specially designed for Renault ZOE on the Norwegian IT-power grid
- Complete charging solution produced and developed in Norway - isolation transformer and charging in one
- Space-saving and easy installation- can be easily mounted on the wall
- Built-in DC-RCM 6mA - Does not need ground fault protection type B
A complete charging solution to be able to charge the Renault ZOE on a standard Norwegian IT power grid. The Renault ZOE has a charger that has problems charging on the Norwegian IT network. The Noratel LadeTrafo combines a specially designed isolation transformer with a type 2 charging box/ charging station and a 5 meter charging cable with a type 2 plug.
The charging transformer supports a continuous load of 3.7 kW and creates a galvanic separation between the E-works' power grid (primary winding) and outgoing course (secondary winding). Thus, one of the phases can be earthed so that you get an N conductor and the car perceives the load in the secondary network as a local TN-S power network.
The charging transformer, LadeTrafo, is well suited in situations where earth faults can cause problems with charging electric vehicles as it creates a galvanic separation (new local power grid).
Practical and Easier Installation
The LadeTrafo is based on the Noratel low-loss transformer which has had low idle losses and suppresses the starting current so that the connection to normal residual courses is possible without problems with the fuses blowing out. The recommended protection is therefore a 16A combi-automatic switch Type A, C- characteristic.
The LadeTrafo is small and therefore space-saving and can easily be mounted on a wall, which simplifies installation and lowers installation costs.
Earth Fault Circuit Breaker
New regulations (NEK 400:2018-722 standard) require that all new current courses to be used to charge electric vehicles must have an earth fault protection/ earth fault circuit breaker Type B. The charging station has built-in earth fault protection for AC (30mA) and DC-RCM module (6mA) which takes care of the DC-protection (according to IEC61851) and means that you do not need earth fault protection type B installed in the fuse box.
Assembly/ Installation
After receiving your charging station from us, you can easily install it by contacting one of our installation partners or your local electrician. By agreement, our partners will visit you for an inspection and will provide a price quote for installation that is right for your particular case.
The charging station fits, among other things, electric vehicles and plug-in hybrids:
- Ford Focus Electric
- Jaguar I-PACE
- Hyundai IONIQ
- Hyundai KONA
- Nissan LEAF 2018
- Opel Ampera
- Renault ZOE
According to regulations on electrical equipment §21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by an authorized and registered installation company installasjonsvirksomhet.
Use ladeguiden (our charging guide) if you are unsure if this product suits your plug-in hybrid or electric car.
Technical Details
| Charging Outlet/ Plug |
Type 2 plug |
|---|---|
| Length of Cable |
5 meters |
| Number of Phases |
1 |
| Power Supply (AC) |
16A / 230V IT-NETT |
| Exit (AC) | 16A / 230V TN-S net |
| Charging Effect |
3,7 kW |
| Operating Voltage |
1-phase 230V / 230V |
| Earth Fault Protection |
AC 30mA and DC-RCM 6mA |
| Authorization | None |
| Color |
Black |
| Insulation Voltage |
2,5 kV AC RMS |
| Charging Standards | IEC 61851-1, EN61558-2-4 |
| Operating Temperature | -20°C - 40°C |
| Measurements | L 420 mm x W 541 mm x H 180mm |
| Weight | 40 kg |
| Security/ Protection Class | IP44 |
| Installation | Simple and quick installation. Pre-wired cables |
| Certifications |
CE |
| Warranty |
2 years |
Questions and Answers
Does LadeTrafo support 230V / 3-phase mains (IT)?
Yes, it can be connected to 230V/3-phase IT mains.
Installation and user manual is found below:
Bruksmanual kommer - Norwegian Language
Warranty
We are proud of our products and it is important for us that you, as a customer, are satisfied. That's why we give you a 2 year warranty on the vast majority of our products- with the exception of consumer goods. Look for the warranty logo to see what applies to this particular product. Our warranty means that this product should function as expected through it's entire warranty time. (In addition to your rights under the Consumer Goods Act). Read more about this warranty in our purchase conditions kjøpsbetingelser.
Related Products
SKU: ZM000688
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Zaptec
Product Information Product Information Dynamic load and phase balancing that provides optimal utilization of the available capacity while charging Suitable for all electrical vehicles and homes Works on all power grids- 230V 1/3-phase (IT) and 400V 3-phase (TN) Eco-mode- Get...
5.119 kr eks. mva.
SKU: ECL11S
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Easee
Product Information Product Information Universal charging station compatible with all electric cars Developed and manufactured in Norway — designed to withstand the Nordic climate, including rain, snow, humidity, and frost Supports all electrical grids (IT, 230V/1+3-phase, TT, and TN 400V)...
4.266 kr eks. mva.
SKU: ZM000613
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Zaptec
Product Information Product Information Dynamic load and phase balancing that provides optimal utilization of the available capacity while charging Works on all power grids- 230V 1/3-phase (IT) and 400V 3-phase (TN) Progressive - Intelligent charging solution that combines advanced hardware...
10.396 kr eks. mva.
SKU: EL22T2S
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Enelion
Product Information Elegant and nice charging station with black anodized aluminum Comes with integrated socket (household socket) for tools and other uses Enclosure made of polycarbonate and anodized aluminum - Unique design that is durable and rust-free RFID card reader...
6.392 kr eks. mva.
SKU: 37602
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: Ratio
Product Information Product Information Dynamic charging and load balancing - charge with up to 32A/1-phase without upgrading the main fuse Choose between type 2 contact/ outlet or fixed charging cable with type 2 plug Built-in DC-RCM 6mA - does not need earth...
5.592 kr eks. mva.
