Wallbox Lumina Premium — 22 kW — 32A/3-phase — Type 2 connector

Lumina is the next generation AC charging station with a robust construction made of polycarbonate and anodized aluminum. It comes in black. The charging station delivers up to 22kW (32A / 400V / 3-phase) which provides very rapid charging for cars that support this.

Charging status is indicated by LED lights at the top, making it easy to check the charging progress. You have the ability to control the charging process thanks to a dedicated mobile app, and a sophisticated, minimalist design that is valued in international design competitions.

Simple Installation

Lumina can be connected to the power network either from above, behind, or from the bottom of the backplate. This provides flexibility in installation and also makes it easier and less expensive for the electrician to install. The charging box stands out for its modular design which shortens the installation time to 15 minutes. The charging station comes with built-in protection (6mA DC-RCM/RDC-DD) so there is no need for a Type B RCD. A regular Type A residual-current device is sufficient.

Mobile App

ENELION LUMINA App mobile app allows features such as: scheduling charging sessions, start/stop, adjusting the current, changing authorization settings, managing the Schuko socket with a delayed start option.

Integrated Socket

The integrated socket allows you to charge your car at the same time as you charge, for example, your electric scooter. The socket is limited to a maximum of 10A and it is possible to control the socket via the mobile app - on / off, and delay charging.

Expand with More Units - Load Balancing Between Multiple Units

Lumina supports load balancing between multiple units that communicate with each other via their own WiFi. Each charging box creates a common WiFi and allows communication between multiple charging stations and thus load balancing. Automatic load balancing between several charging boxes ensures the utilization of all available capacity on the power circuit when charging:

• If one car is charging, the car gets all the available power
• If two cars are connected, the power is shared between both based on the maximum set current draw of the charging station

The charging station can also be set from 6-32A and will distribute, for example, a 20A power circuit to 2x10A when both are in use.

User Access

An RFID card reader is standard and can be activated so that the charging station will not charge until an RFID card is read (access control). This makes the charging station suitable for the workplace, housing associations, or at home. The charging station can also be configured open, so-called "Plug and Charge," which means you do not need RFID to start charging and only need to connect, and the charging will automatically start (standard configuration).

Universal Charging Station

The charging station can be adapted to all power circuits and can be configured with 1A steps between 6-32A.

Power Meter

With an integrated DIN rail, it is possible to install both single or three-phase MID-certified meters in each charging box. This gives the possibility to read the power consumption in the charging box or via the app.

Compatibility

Lumina is compatible with all electrical installations, all power grids, and all electric vehicles. Therefore, you can be sure that your investment will last for many years to come. The charging station fits all electric vehicles on the market and is well suited if you have 2 or plan to have two rechargeable vehicles in the future.

In accordance with electrical equipment regulations § 21, we are obliged to inform our customers that any electrical equipment intended to be part of a permanent electrical installation can only be installed by an authorized and registered installation company.