Note! Can only be installed by a registered installation company.
- Produktinformasjon
- Technical description
- Questions and answers
- Documentation
- Warranty
Product information
- NexBlue ZEN provides automatic dynamic load balancing of the main fuse of NexBlue Edge(s)
- Charge with up to 32A when electricity consumption is low in the home
- Adapt the charging of the electric car(s) according to the power tariff
- Communicates with the charging station(s) via Nexus radio frequency, WiFi or LAN
- Easily attached to the fuse box on an existing DIN rail (3-module)
- Monitor the storm consumption in the home/building through the NexBlue App
- 3 variants: CT terminals, HAN / P1 plug
NexBlue Zen (Current sensor) is a practical device that reads the power consumption in real time and will optimize the consumption by dynamically load balancing the intake. ZEN also offers the option of charging in case of excess solar power. It is perfect for situations with and without smart meters and can communicate with NexBlue chargers via Wi-Fi, LAN or Nexus RF locally.
This means that you can use all the available power for electric car charging when the power consumption in the house is low. This is very practical when you have a small main fuse, or limited capacity if there is much else in the home that draws a lot of electricity.
ZEN is supplied in three different solutions, respectively CT clamps, P1 and HAN plug. The former is mounted on DIN rails in the fuse box and takes 3 modules.
The CT package includes:
 |
 |
 |
 |
| NexBlue Zen current sensor | C10 1P MCB / circuit breaker | 3-in-1 CT clamps for reading current consumption | Antenna |
NexBlue Zen is easily installed in the fuse box. With a simple configuration, NexBlue ZEN communicates with the charging station(s), via Nexus radio frequency, WiFi or LAN. The range of Radio RF is approximately 30-50 meters depending on location and built-up area.
Smart power management
NexBlue ZEN ensures that the charging of the car(s) takes place at the most convenient time, e.g. when the demand for electricity for other products is low in the home/building. The radio frequency communication between the ZEN and the Edge ensures that the automatic dynamic load balancing will continue to work if the connection to the cloud is lost, or if there is a problem with your wireless network.
The HAN / P1 port must be opened for the ZEN to receive data. This is done by contacting your network company and the procedure with the various network owners can be found here .
What is a HAN port?
The Home Area Network (HAN) is a separate physical output (port) on your new automatic current meter (AMS meter) in your fuse box. On these electricity meters there is a so-called HAN port which you can activate if the network company has enabled this. This port can give you detailed information about your power consumption. Easee Equalizer is compatible with all new AMS current meters in Norway with HAN port.
Where can I find the HAN port on the various smart meters?
There are mainly three different AMS / Smart meters that are used in Norway and below we have marked (red ring) where the HAN port is normally located on the three different models. Note that there are different models and the picture of the power meters may differ from the exact model you have.
According to the regulations on electrical equipment § 21, we are obliged to inform our customers that all electrical equipment intended to be part of a fixed electrical installation can only be installed by a registered installation company .
Technical details
| Function | Automatic load balancing between the charging robots and the building / main fuse |
|---|---|
| Goal | 131 x 131 x 39 mm (LxWxD) |
| Cable length | 1.5 meters |
| Connection | RJ 45 LAN - HAN port (Home Area Network) |
| Power supply | Via HAN port |
| Wireless connection | Wi-Fi / Radio RF (range of 30-50 meters depending on conditions) |
| Color | White |
| Weight | 150 grams |
| Standards and approval | Radio Equipment Directive 2014/53/EU ROHS directive 2011 /65/EU CE |
| Warranty | 5 years |
Questions and answers
AMS meters in Norway
Does the Equalizer fit all AMS current meters in Norway?
Yes, it fits all Norwegian AMS current meters.
Warranty
We are proud of our products and it is important to us that you as a customer are satisfied. That's why we give a 2-year guarantee on the vast majority of our products, with the exception of consumables. Look for the warranty logo to see what applies to this particular product. Our guarantee means that the item must work as expected throughout the guarantee period (this is in addition to your rights under the Consumer Goods Act). Read more about the guarantee in our purchase conditions .
Related Products
SKU: NB1620A-S
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: NexBlue
Product information Universal charging station compatible with all electric cars Winner of the iF Design Award 2024 Supports all electrical grids (IT, 230V/1+3-phase, TT, and TN 400V) and all current strengths (6-32A) Reliable and forward-looking charger for home charging Good...
4.799 kr eks. mva.
SKU: NBCTSolar
AVAILABILITY: In stock
PRODUCT TYPE: Ladestasjoner
VENDOR: NexBlue
Produktinformasjon CT-klemmer for måling av strøm Hurtig og enkel installasjon Lad med energioverskudd fra solcellene om du har solceller Kobles direkte på NexBlue ZEN Nexblue CT-klemmer for solcellemåling kobles raskt og enkelt sammen med Nexblue Zen (Current Sensor)...
1.276 kr eks. mva.
SKU: CS3ANA-1
AVAILABILITY: In stock
PRODUCT TYPE: Charging stations
VENDOR: NexBlue
Product information NexBlue ZEN provides automatic dynamic load balancing of the main fuse of NexBlue Edge(s) Charge with up to 32A when electricity consumption is low in the home Adapt the charging of the electric car(s) according to the power...
1.356 kr eks. mva.
